| 196RB | |
| Medium Duty Roller Bed Belt Conveyor | |
 |
|
| SPECIFICATIONS | ||
| BELTING: PVC-120 black. CARRIER ROLLERS: 1.9" dia. x 16 ga. steel rollers, model 196S. DRIVE PULLEY: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged. TAIL PULLEY: 4" dia., crowned, with 1-3/16" dia. shaft. | END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application. SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. BED: 3-1/2" x 1-1/2" x 10 ga. channel frame. Bed sections attached with couplings and floor supports. BELT SPEED: 60 FPM, constant. |
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up. RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable. ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. FLOOR SUPPORTS: SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB; SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4" TOB. Supports provided at both ends and each bed joint and should be lagged to floor. |
|
|
24
Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0" |
 Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others). |