Model PPF is specifically designed to convey small parts with standard 2” high streamline flights. OPTIONAL features includes flights in 1” and 4” heights and overlapping sideguards.
Model PPF is specifically designed to convey small parts with standard 2” high streamline flights. OPTIONAL features includes flights in 1” and 4” heights and overlapping sideguards.
| Specifications | BELTING: Series 900 flat top gray polypropylene belt with 2″ high streamline flights on 11.9″ centers, FDA approved belting. DRIVE SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. TAIL SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. END DRIVE: Allows one-direction (unit) operation. TAKE-UP: Catenary type, underneath mounted. BEARINGS: Drive shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. BELT SPEED: 35 FPM, constant. BED: 8″ deep x 10 ga. enclosed box type construction with UHMW wearstrips mounted to 14 ga. steel belt return pan. INCLINE: 30, 36 and 45 degree (specify). PORTABLE SUPPORT: Adjustable floor supports with 4″ dia. casters & bracing. ROLLER CHAIN: No. 50 chain provided at drive shaft. Chain take-up provided on motor base. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ELECTRICAL CONTROLS: Optional |
|---|
PPF
Model PPF is specifically designed to convey small parts with standard 2” high streamline flights. OPTIONAL features includes flights in 1” and 4” heights and overlapping sideguards.
| Specifications | BELTING: Series 900 flat top gray polypropylene belt with 2″ high streamline flights on 11.9″ centers, FDA approved belting. DRIVE SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. TAIL SPROCKETS: 4.1″ pitch dia. with 1.5″ square bore. END DRIVE: Allows one-direction (unit) operation. TAKE-UP: Catenary type, underneath mounted. BEARINGS: Drive shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. BELT SPEED: 35 FPM, constant. BED: 8″ deep x 10 ga. enclosed box type construction with UHMW wearstrips mounted to 14 ga. steel belt return pan. INCLINE: 30, 36 and 45 degree (specify). PORTABLE SUPPORT: Adjustable floor supports with 4″ dia. casters & bracing. ROLLER CHAIN: No. 50 chain provided at drive shaft. Chain take-up provided on motor base. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ELECTRICAL CONTROLS: Optional |
|---|
PPF
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Glass & Solar Handling
Heavy Duty Conveyors
laundry
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved