Roach open type wire mesh belt conveyors offer opening in bed to allow air or various sprays to pass through belt and conveyors to accommodate numerous spraying or drying applications.
Roach open type wire mesh belt conveyors offer opening in bed to allow air or various sprays to pass through belt and conveyors to accommodate numerous spraying or drying applications.
| Specifications | BELTING: 1/2″ x 1″ x 11 ga. clinched edge, galvanized wire mesh belt. DRIVE SPROCKETS: 4″ dia. with 1-3/16″ dia. shaft; 8″ dia. with 1-7/16″ dia. shaft. TAIL SPROCKETS: 4″ dia. sprocket with 1-3/16″ dia. shaft. END DRIVE: One-direction unit operation. TAKE-UP: Screw type unit at tail end provides 12″ belt take-up. BED: 7″ x 1-1/2″ x 10 ga. open type formed channel frame w/ UHMW wear strips. RETURN ROLLERS: 1.9″ dia. x 16ga. steel, model 196S, adjustable. FLOOR SUPPORTS: Optional BELT SPEED: 60 FPM, constant. BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. |
|---|
700SBO
Roach open type wire mesh belt conveyors offer opening in bed to allow air or various sprays to pass through belt and conveyors to accommodate numerous spraying or drying applications.
| Specifications | BELTING: 1/2″ x 1″ x 11 ga. clinched edge, galvanized wire mesh belt. DRIVE SPROCKETS: 4″ dia. with 1-3/16″ dia. shaft; 8″ dia. with 1-7/16″ dia. shaft. TAIL SPROCKETS: 4″ dia. sprocket with 1-3/16″ dia. shaft. END DRIVE: One-direction unit operation. TAKE-UP: Screw type unit at tail end provides 12″ belt take-up. BED: 7″ x 1-1/2″ x 10 ga. open type formed channel frame w/ UHMW wear strips. RETURN ROLLERS: 1.9″ dia. x 16ga. steel, model 196S, adjustable. FLOOR SUPPORTS: Optional BELT SPEED: 60 FPM, constant. BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor. ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base. |
|---|
700SBO
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Glass & Solar Handling
Heavy Duty Conveyors
laundry
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved