Model 254TCDLRC is a medium duty TAPERED ROLLER chain driven live roller curve, designed to transport medium duty loads such as castings, drums or pallet loads. Orientation of pallet loads are maintained when using this chain driven live roller curve.
| Specifications | TREAD ROLLERS: 2-1/2″ dia. to 1-11/16″ dia. x 14 ga. steel tapered rollers, model 254T with sprockets. CHAIN DRIVE: Roller to roller with No. 60 circular roller chain. END DRIVE: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor. ROLLER CENTERS: 6″ RC measured at outside radius of curve. SPEED: 45 FPM, constant. BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed. BED: 6″ x 1-1/2″ x 10 ga. and 4″ x 1-1/2″ x 10 ga. formed steel channel frame. FLOOR SUPPORTS: Optional MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). ELECTRICAL CONTROLS: Optional |
|---|
254TCDLRC
Model 254TCDLRC is a medium duty TAPERED ROLLER chain driven live roller curve, designed to transport medium duty loads such as castings, drums or pallet loads. Orientation of pallet loads are maintained when using this chain driven live roller curve.
| Specifications | TREAD ROLLERS: 2-1/2″ dia. to 1-11/16″ dia. x 14 ga. steel tapered rollers, model 254T with sprockets. CHAIN DRIVE: Roller to roller with No. 60 circular roller chain. END DRIVE: Reversible drive, side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units. CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor. ROLLER CENTERS: 6″ RC measured at outside radius of curve. SPEED: 45 FPM, constant. BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed. BED: 6″ x 1-1/2″ x 10 ga. and 4″ x 1-1/2″ x 10 ga. formed steel channel frame. FLOOR SUPPORTS: Optional MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor. DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve). ELECTRICAL CONTROLS: Optional |
|---|
254TCDLRC
Accumulation
Belt Conveyors
Belt Driven Live Roller
Chain Driven Live Roller
Flexible Conveyors
Gravity Conveyors
Line Shaft
MDZ | Motor Driven Zone Accumulator
Parts Conveyor
Plastic Belt
Powered Roller
Slat Conveyors
Transfers
Wire Mesh Belt
Glass & Solar Handling
Heavy Duty Conveyors
laundry
MDR | Motor Driven Roller Smart Conveyors
Sortation Conveyors
Special Transfers
Stackers/Destackers
Stops | Barriers | Walkovers
Tabletop Chain Conveyors
Transfer Carts
Turntables
Upenders | Downenders | Rollovers
Vertical Conveyors
Wheel & Tire Conveyors
© 2024 Roach Conveyors. All Rights Reserved