TREAD ROLLERS: 1.9″ dia. x 12 ga., model 192S.
CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.
CHAIN GUARD: All chains are completely enclosed along the entire length of conveyor.
CENTER DRIVE: Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS: 4″ or 6″ RC ONLY.
SPEED: 35 FPM, constant.
ACCUMULATION ZONE: 5′-0″ zone lengths, zone singulation operation, photo electric sensor controlled zones with air clutch (60 psi max).
BED: 6-1/2″ x 1-1/2″ x 10 ga. and 4-1/2″ x 1-1/2″ x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.
FLOOR SUPPORTS: Optional
BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.
FRL: Unit is provided with filter, regulator and lubricator with 3/8″ ports for 60 PSI operational pressure.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CAPACITY: 300 lbs./ft. up to a maximum of 1200 lb. pallet load.
ELECTRICAL CONTROLS: Optional