Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'. Roller Beds

Roach Conveyors

The 24 Hour Shipment Leader
Tel: (870) 483-7631

Roach Heavy Roller Bed

Roach Conveyors

751 roller bed

Belt Conveyor

Heavy duty

751RB Conveyor parts list
24 HR Shipment Available*

SPECIFICATIONS

BELTING: PVC-120 black.

DRIVE PULLEY: 8" dia. with 1-7/16" dia. shaft on 15"-39" BF; 12" dia. with 1-15/16" dia. shaft above 39" BF; both crowned and fully lagged.

CARRIER ROLLERS: 2-1/2" dia. x 11 ga. steel, model 251S.

TAIL PULLEY: 4" dia. with 1-3/16" dia. shaft on 15"-39" BF; 6" dia. with 1-7/16" dia. shaft above 39" BF; both crowned.

END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.

SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.

TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

BELT SPEED: 35 FPM, constant.

BED: 7" x 10 ga. channel frame. Bed sections attached with couplings and floor supports.

FLOOR SUPPORTS: Optional

MOTOR DRIVE: 1 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9" dia x 12 ga. steel roller, model 192S on 15"-39"BF, 1.9" x 9 ga. steel, model 199S on 45"-57" BF.

ELECTRICAL CONTROLS: Optional