Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings. Friction Top. Friction Top. Friction Top.Plastic Belt Conveyor

Roach Conveyors

The 24 Hour Shipment Leader
Tel: (870) 483-6991

Roach Plastic Conveyors Friction Top

Roach Conveyors

700 friction top

plastic belt

conveyor

700PB Conveyor

SPECIFICATIONS

BELTING: Series 900 flat top gray polypropylene belt, FDA approved belt.

DRIVE SPROCKETS: 4.1" pitch dia. with 1.5" square bore. Available with OPTIONAL 6.1" or 6.8" pitch dia. sprockets with 1.5" or 2.5" square bore.

TAIL SPROCKETS: 4.1" pitch dia. with 1.5" square bore. Available with OPTIONAL 6.1" or 6.8" pitch dia. sprockets with 1.5" or 2.5" square bore.

END DRIVE: Allows one-direction (unit) operation.

BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

BED: 7" x 1-1/2" x 10 ga. channel frame with open style bed construction and UHMW wearstrips mounted to longitudinal channels.

TAKE-UP: Catenary type located at discharge end.

RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.

BELT SPEED: 60 FPM, constant.

FLOOR SUPPORT: Optional.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

ELECTRICAL CONTROLS: Optional