Roach, Chain Driven Live Roller

3530CDLR Conveyor

TREAD ROLLERS: 3-1/2" dia. x .300 wall steel, model 3530S with sprockets.

CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.

CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth sealed. Roller bearings provide roller capacity of 540 lbs. per roller (maximum).

BED LENGTHS (6" RC, #60 CHAIN AND 12" RC, #80 CHAIN): Intermediate bed section lengths 3'-0", 4'-0", 5'-0", 6'-0", 7'-0", 8'-0", 9'-0" and 10'-0" increments. Minimum overall conveyor length with drive 5'-0". Maximum overall conveyor length 80'-0".

BED LENGTHS (7-1/2" RC, #80 CHAIN): Intermediate bed section lengths 3'-1-1/2", 3'-9", 4'-4-1/2", 5'-0", 5'-7-1/2", 6'-3", 6'-10-1/2", 7'-6", 8'-1-1/2", 8'-9", 9'-4-1/2" and 10'-0". Minimum overall conveyor length with drive 5'-0". Maximum overall conveyor length 80'-0".

ROLLER CENTERS: 6" with No. 60 chain; 7-1/2" and 12" with No. 80 chain.

CHAIN DRIVE: Roller to roller with No. 60 or No. 80 roller chain.

SPEED: 35 FPM, constant.

BED: 6" at 8.2 lbs. and 8" at 11.5 lbs. structural steel frame. Bed sections attached with couplings and floor supports.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CAPACITY: 2500 lbs. per roller.

FLOOR SUPPORTS: Optional

ELECTRICAL CONTROLS: Optional