Roach Conveyors, Chain

251CDLRC Conveyor

TREAD ROLLERS: 2-1/2" dia. x 11 ga. steel, model 251S with sprockets.

CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.

END DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

BEARINGS: Removable type, heavy duty,  ball bearings, zinc plated, grease packed, labyrinth sealed.

ROLLER CENTERS: 6" RC measured at outside radius of curve.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

SPEED: 35 FPM, constant.

BED: 6" x 1-1/2" x 7 ga. and 4" x 1-1/2" x 7 ga. formed steel channel frame.

CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.

DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with  reference point located at outside of curve).

FLOOR SUPPORTS: Optional

ELECTRICAL CONTROLS: Optional