BELTING: 3-ply black nitrile belt or 1/2" x 1" flat wire mesh belt with 1-1/2" high galvanized cleats on 12" centers.
DRIVE PULLEY: 4" dia., with 1-3/16" dia. shaft, fully lagged with nitrile belt; 4" dia. sprockets supplied with flat wire mesh belt.
TAIL PULLEY: 4" dia. with 1-3/16"
dia. shaft.
TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.
BED: 8" deep x 12 ga. enclosed box
type construction with 14 ga. steel belt return pan.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BELT SPEED: 35 FPM, constant.
MINIMUM PARTS SIZE: 1/2" cube for nitrile belt, 1" cube for flat wire mesh belt.
INCLINE: 30, 36 and 45 degree (specify).
PORTABLE SUPPORT: Adjustable floor support with 4" dia. casters and bracing.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CAPACITY: 350 lbs. total distributed load.
ROLLER CHAIN: No. 50 chain provided at drive pulley. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional. |
